M10 Swaged Internal Threads with Externally Threaded Eye Ends for 8mm Rope

Minimum order of £40 (inc VAT)
Free delivery over £60 (inc VAT)
Call for a free quotation - 0800 1601 316

M10 Swaged Internal Threads with Externally Threaded Eye Ends for 8mm Rope

£62.75 Inc. VAT, £52.29 Ex. VAT

Measurements must be accurate from the centre of the eye to the centre of the opposite eye, as shown in the above photo.

Download Catalogue Pages

SKU: 30813-0800-01 / 30814-0800-01 Categories: Eye Ends, Wire Rope Assemblies

Description

Range of tensioning/loosening available for this assembly is: +20mm / -70mm.
Dimension (b1) is enlarged by 3% to 6% during the swaging process. Tensioning range: the external thread ends are both screwed in halfway.
Caution: the minimal screw insertion depth is 1.5 x thread dimension (M6 = 9mm).
The internal threads will be swaged onto the rope and the eyes and nuts will come as loose parts.

Thread Direction	SKU	DXF	ø mm	a	b1	b2	ø d1	ø d2	e	h	k	–	+	Kg
Left Hand	30813-0800-01	DXF	8.0	M10	205	29	10.5	13	12.0	22.0	6	35	10	0.172
Right Hand	30814-0800-01	DXF	8.0	M10	205	29	10.5	13	12	22.0	6	35	10	0.172

Additional information

Fitting	Eye end
Rope Diameter	8mm
Thread Size	M10
Rope Type	6 x 7 + WC, 6 x 19 + WC
Thread Direction	Right Hand/Left Hand
Material	AISI 316

Installation Guide

1. Screw the hexagonal nuts onto the external thread of the eye ends.
2. Screw the external thread of the eyes into the internal thread (must be at least 1.5x the diameter of the thread to achieve assembly’s full strength potential).
3. Attach one side to the bracket (should be installed before installing our wire rope assembly) Please contact us for methods of fixing the assembly based on your requirements.
4. Proceed to attach the other end following the same instructions.
5. You should notice that because of the LH / RH threads in use the assembly will tension when the rope is rotated in one direction. Rotate the rope until you find the tension required.

6. Once you have reached your desired tensioning lock the nuts off against the internal threads at either end to ensure that the assembly doesn’t lose tension.

7. To remove the assembly, you should reverse the instructions.

Contact Us

If you have any questions, require more information or would like a quote, please contact us using the form below.

Contact

Get a quote for your stainless steel wire ropes, rods, tie bars and wire mesh systems.

Contact Us

Call us on:

01761 419427

Jakob Rope Systems is supplied exclusively in the UK by MMA Architectural Systems, providing quality solutions for Green Walls, Car Park Safety, Animal Enclosures and Bridge Safety. We are also the sole UK agent for the proven Geggus Entrance Matting System.