fbpx

Skip to: main navigation | main content | sitemap | accessibility page

M5 Swaged Internal Threads with Externally Threaded Clevises for 3mm Rope

M5 Swaged Internal Threads with Externally Threaded Clevises for 3mm Rope

£31.07 Including VAT

M10 Swaged Internal Threads with Externally Threaded Clevises for 8mm Rope Measurement

Measurements must be accurate from the centre of the clevis pin to the centre of the opposite clevis pin, as shown in the above photo. 

pdf-small Download Catalogue Pages – Fork End/Clevises For 3mm Rope

SKU: 30812-0300-01 / 30811-0300-01 Categories: ,

Description

 Range of tensioning/loosening available for this assembly is: + 10mm /- 16mm.
 The internal threads will be swaged onto the rope and the clevises, nuts will come as loose parts.
 For fabrication we will measure from the centre of the clevis fitting pin to the centre of the opposite clevis fitting pin, so please specify your measurements in accordance with this.

Thread Direction  SKU DXF ø mm a b ø d1 ø d2 e f g + Kg
 Right Hand 30812-0300-01 DXF 3 M5 94 5 7 6 12 7.5 8 5 0.032
 Left Hand 30811-0300-01 DXF 3 M5 94 5 7 6 12 7.5 8 5 0.032

Additional information

Fitting

Clevis/Fork

Rope Type

1 x 19, 6 x 7 + WC, 6 x 19 + WC

Rope Diameter

3mm

Thread Size

M5

Material

AISI 316

Installation Guide

1. Screw the hexagonal nuts onto the external thread of the clevises.
2. Screw the external thread of the clevis into the internal thread (must be at least 1.5x the diameter of the thread to achieve assembly’s full strength potential).
3. Attach one side to the bracket (should be installed before installing our wire rope assembly) by placing the fork over it ensuring the hole in the bracket is inline and sufficient enough in size to allow the fixing pin to slot through. Slot the pin through the clevis and bracket and secure with the circlip provided. Please contact us for alternative methods of fixing the assembly based on your requirements.
4. Proceed to attach the other end following the same instructions.
5. You should notice that because of the LH / RH threads in use the assembly will tension when the rope is rotated in one direction. Rotate the rope until you find the tension required.
6. Once you have reached your desired tensioning lock the nuts off against the internal threads at either end to ensure that the assembly doesn’t lose tension.
7. To remove the assembly, you should reverse the instructions.

Contact Us

If you have any questions, require more information or would like a quote, please contact us using the form below.

Contact

  • Drop files here or
    Accepted file types: jpg, png, jpeg, pdf, doc, docx.
  • This field is for validation purposes and should be left unchanged.

 

Get a quote for your stainless steel wire ropes, rods, tie bars and wire mesh systems.

Call us on:

01761 419427

Jakob Rope Systems is supplied exclusively in the UK by MMA Architectural Systems, providing quality solutions for Green Walls, Car Park Safety, Animal Enclosures and Bridge Safety. We are also the sole UK agent for the proven Geggus Entrance Matting System.