Skip to: main navigation | main content | sitemap | accessibility page

M6 Swaged Internal Threads with Externally Threaded Eye Ends for 4mm Rope

M6 Swaged Internal Threads with Externally Threaded Eye Ends for 4mm Rope

£24.60 Inc. VAT, £20.50 Ex. VAT

Measurements must be accurate from the centre of the eye to the centre of the opposite eye, as shown in the above photo. 

pdf-small Download Catalogue Pages

SKU: 30813-0400 / 30814-0400 Categories: ,


 Dimension (b1) is enlarged by 3 to 6% during the swaging process. Tensioning range: the external thread ends are both screwed in halfway.
 Caution: the minimal screw insertion depth is 1.5 x thread dimension (M6 = 9mm).
 Range of tensioning/loosening available for this assembly is: + 10mm / – 16mm
 The internal threads will be swaged onto the rope and the eyes and nuts will come as loose parts.

 Thread Direction   SKU   DXF   ø mm    a    b1   b2   ø d1   ø d2    e   h   k   –   +   Kg 
Left Hand 30813-0400-01 DXF 4 M6 89 16 6.5 8 7 14 4 8 3 0.032
Left Hand 30813-0400-02 DXF 4 M6 114 16 6.5 8 7 14 4 15 11 0.037
Right Hand  30814-0400-01 DXF 4 M6 89 16 6.5 8 7 12 4 8 3 0.021
Right Hand 30814-0400-02 DXF 4 M6 114 16 6.5 8 7 12 4 15 11 0.037

Additional information


Eye End

Rope Diameter


Thread Size


Rope Type

1 x 19, 6 x 7 + WC, 6 x 19 + WC


AISI 316

Thread Direction

Right Hand/Left Hand

Installation Guide

1. Screw the hexagonal nuts onto the external thread of the eye ends.
2. Screw the external thread of the eyes into the internal thread (must be at least 1.5x the diameter of the thread to achieve assembly’s full strength potential).
3. Attach one side to the bracket (should be installed before installing our wire rope assembly). Please contact us for methods of fixing the assembly based on your requirements.
4. Proceed to attach the other end following the same instructions.
5. You should notice that because of the LH / RH threads in use the assembly will tension when the rope is rotated in one direction. Rotate the rope until you find the tension required.
6. Once you have reached your desired tensioning lock the nuts off against the internal threads at either end to ensure that the assembly doesn’t lose tension.
7. To remove the assembly, you should reverse the instructions.

Contact Us

If you have any questions, require more information or would like a quote, please contact us using the form below.


  • Drop files here or
    Accepted file types: jpg, png, jpeg, pdf, doc, docx, Max. file size: 20 MB, Max. files: 5.
    • This field is for validation purposes and should be left unchanged.


    Get a quote for your stainless steel wire ropes, rods, tie bars and wire mesh systems.

    Call us on:

    01761 419427

    Jakob Rope Systems is supplied exclusively in the UK by MMA Architectural Systems, providing quality solutions for Green Walls, Car Park Safety, Animal Enclosures and Bridge Safety. We are also the sole UK agent for the proven Geggus Entrance Matting System.