Skip to: main navigation | main content | sitemap | accessibility page

Swageless Rope Fitting / Self-Fit

A comprehensive range of self-fit fittings for stainless steel wire ropes

Swageless Rope Fitting/Self-Fit

Showing all 15 results

Swageless rope fittings are ideal when you are in a hurry or cannot be sure of an accurate dimension for your wire rope assembly until installing.

To install a self-fit end, all you need to do is unscrew the body of the self-fit fitting, slide the rope through the hole in the smaller section, place the inserts inside as instructed and screw back together again. No unwinding of the rope is required, all you need is a spanner! All of our swageless fittings come with a pictorial instruction sheet.

Our swageless rope fittings conform to the highest standards and are SIMPLE to use. The strength of the fitting is not compromised, achieving the same strength as a swaged end. Jakob holds an ISO9001 certificate, so you can be assured of the highest quality.

If you would like to use a swageless end as part of a assembly select your 6×7 ropes and use a self fit end at both ends, or contact us and we can arrange for one end to be swaged and the other to be self-fit (this will save you some money).

Get a quote for your stainless steel wire ropes, rods, tie bars and wire mesh systems.

Call us on:

01761 419427

Jakob Rope Systems is supplied exclusively in the UK by MMA Architectural Systems, providing quality solutions for Green Walls, Car Park Safety, Animal Enclosures and Bridge Safety. We are also the sole UK agent for the proven Geggus Entrance Matting System.